OUR PRODUCTS
DISTRIBUTION TRANSFORMERS
SERVO VOLTAGE STABLIZERS
FURNACE TRANSFORMERS
ROLLER TYPE SERVO VOLTAGE STABILIZER
DRY TYPE TRANSFORMERS
PACKAGE SUB STATION
VARNISH IMPREGNATED
CAST RESIN TYPE
AUTO TRANSFORMER &
CUSTOMISE TRANSFORMER
 
   
  SERVO VOLTAGE STABLIZERS  

    Servo Controlled Automatic Voltage Controller (Stabilizer)

Voltage fluctuation is a common phenomenon in every part of the country. Automatic Voltage Controller (Stabilizer) is an equipment to obtain constant voltage   tram flucfuating supply system. The industrial units running round the clock usually face the problem of low & high voltage. 90% of industrial load is of motors. Electric motors draw considerably high current at low & high voltage. This higher current affects the electric motors (particularly smaller capacity motors upto 7.5 H.P.) in these ways: . Higher current produce higher losses in Electric motors which cause premature failure of winding.

  • Higher current produce higher losses in Electric motors which cause premature failure of winding.

  • These higher current of Electric motors also increase losses of Cables, Switches, Transformer & other associated equipments.

  • This higher current of Electric motors require 15-20% higher setting of over load relay to avoid frequent tripping of motor's starter. Higher set­ting of over load relays have very little safety margin against single phasing and over loading conditions.

the installation of the stabilizer and maintaining 390/400 volts, the motor will operate smoothly drawing 15-20% lesser current and corresponding the relay setting can be reduced by 15-20%. In case single phasing occurs, the relay will trip in 40-50 seconds. The motor can withstand the high current for this period and will be safe. Also, the relays, contactors, switchgears , etc. incorporated with the motor will be safe.

    Advantages

  Approximate quantitative advantages of automatic voltage controller at various fluctuation level

Input Voltage Variation % Reduction in Breakdown Possible Appor. Power Saving Possible
Motor Load Below 10 HP. Lighting Load Motor Load Below 10 HP. Lighting Load
380-400 volts Nil Nil Nil Nil & no Servo Stabilizer Required
380-420 volts 5% 10% 3% 5%
380-440 volts 10% 20% 5% 10%
380-460 volts 40% 40% 7% 20%
380-480 volts 60% 60% 10% 30%
     

 Technical Specification

  Servo Stabilizers are available in a wide range and various models. The standard three phase models are suitable  for balanced & unbalanced supply and loads. The standard models confirm to the following specification :

Input Voltage 360-460 V 340-460 V 320-460 V 300-460 V
Efficiency (Approx.) 99.5% 99% 98.7% 98.5%
Output Voltage 400 V t 1 %, 3 Phase, 50 Hz      
Cooling Naturally Oil Cooled      
Type Indoor      
Temprature Rise (Max.) 30° C above ambient      
Mounting class=matterOn Uni Directional Wheel      
Wave From Distortion Virtually Nil      
Duty Cycle 100% Continuous      

 

  • Reduction in breakdown of electrical equipment.

  • Power saving (Reduction in power bills).

  • Improvement in power factor.

  • Depriciation as per income tax act.

  • Uniform quality of end product.

  • Better efficiency in plant reduction in MDI

 
   

An ISO 9002: 2000
Certified Company
     
.................................................................................................................................................................................................................................
HOME | PRODUCTS | VISION & MISSION | CAREER | QUERY | CREDENTIALS | CONTACT US
  Copyright © Ldptindia. All Rights Reserved.  
Designed & Developed By:Easy Technologies